Mega Motion Rascal Owner's Manual download pdf (Page 32)

www.mega-motion.com Rascal

VII. DISASSEMBLY AND ASSEMBLY

DISASSEMBLY

You can disassemble the Travel Scooter into five

pieces: the seat, the front section, the rear section,

the basket, and the battery pack. See figure 18.

No tools are required to disassemble or assemble

your Travel Scooter. Always disassemble or

assemble your Travel Scooter on a level, dry

surface with sufficient room for you to work and

move around—about 5 feet (1.5 meters) in all

directions. Remember that some Travel Scooter

components are heavy and you may need

assistance when lifting them.

WARNING! Do not lift weight

beyond your physical capability.

Ask for assistance when

necessary while disassembling or

assembling your Travel Scooter.

SEAT

REAR SECTION BATTERY PACK

BASKET

FRONT SECTION

Figure 18. Disassembled Travel Scooter

1. Remove the key from the key switch.

2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise

90°. See figure 19. The front wheel must face forward in order to lock the tiller.

3. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when

removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up

on the seat.

4. Disconnect the battery harness. See figure 21.

5. Disconnect the front-to-rear harness. See figure 21.

6. Remove the battery pack from the Travel Scooter by lifting it straight up and off of the Travel Scooter.

Figure 19. Tiller Lock Knob (Locked)

Figure 21. Harness Connections

BATTERY

HARNESS

FRONT-TO-REAR

HARNESS

TILLER LOCK

KNOB

TILLER LOCK

KNOB

Figure 20. Tiller Lock Knob (Unlocked)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Mega Motion Rascal Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Scooters Mega Motion Rascal